地表移动带范围内建构筑物安全可靠性分析

地表建构筑物位于在生产矿山地表开采移动范围内，如果按照一般圈定地表移动范围原则判断建构筑物的安全可靠性，结果是不安全或者预留保安矿柱可保证安全。为分析地表移动带范围内建构筑物安全可靠性，采用FLAC3D软件建立数值模拟模型，对矿区地表移动进行分析研究，并结合建构筑物的破坏等级评判标准，可以更加合理地判断地表移动范围内建构筑物的安全可靠性，对存在相似条件的矿山具有一定的借鉴意义。     

饱和尾粉砂动孔隙水压力发展特性试验研究

采用动三轴仪对内蒙古某尾矿库尾粉砂进行了动强度试验,研究了围压、相对密实度及固结比对动荷载作用下尾粉砂中孔隙水压力发展特性的影响。研究结果表明,随着固结比、相对密实度、围压的增大,动荷载作用下饱和尾粉砂孔压增长曲线形状由陡峭转变为平缓。随着围压及固结比增大,试样动力破坏形式从以孔压值为主要表征指标的液化破坏,转化为以动剪应变为主要破坏形式的软化破坏。动荷载作用下发生液化破坏的饱和尾粉砂孔压增长过程分可为初始增长阶段、稳定增长阶段和快速增长至破坏阶段,孔压增长曲线表现为明显的反S型,本文采用双对数函数对该试验孔压增长曲线进行拟合,结果表明该模型可以较好地模拟尾粉砂在动荷载作用下的孔压发展规律。     

香兰素基非离子表面活性剂的动态表面张力与气/液界面吸附行为

通过最大气泡压力法测定香兰素基聚氧乙烯醚(VAEO)的动态表面张力,利用Word-Tordai方程研究其在气/液界面的吸附行为。结果表明,质量浓度低于临界胶束浓度(cmc)时,VAEO在吸附前期为扩散控制吸附,在吸附后期为混合动力控制吸附;质量浓度大于cmc时,为混合动力控制吸附,胶束不影响吸附行为。VAEO_(10)和VAEO_(20)的扩散系数D的数量级为10~(-11)m~2/s,比文献报道的壬基酚聚氧乙烯醚(NPEO_9)低一个数量级。     

印尼BAYAH电厂一次风机故障原因分析与处理

本文针对印尼BAYAH电厂一次风机设备故障，详细的分析了故障产生的原因，介绍了三点法找转子动平衡和工装车削式在线修复电机滑环工法，阐述了两种工法的原理以及实施步骤。     

Output feedback tracking control for rigid body attitude via immersion and invariance angular velocity observers

A novel immersion and invariance (I&I) angular velocity observer is presented for the attitude tracking control of a rigid body with the lack of angular rate. Global exponential convergence of angular velocity estimate errors are guaranteed by an innovative filter design for the estimates' Euclidean norm. The proposed method requires fewer filter states compared with existing I&I angular velocity observer designs, which achieves a simpler closed-loop structure (dynamic reduction). The observer synthesis and convergence are independent of the control torque, which leads to much convenience in establishing “separation property” when combining a proportional-derivative attitude tracking controller driven by angular velocity estimates. A rigorous stability analysis is provided to ensure the (almost) global asymptotic convergence of the overall closed-loop tracking errors, and several numerical simulations are carried out to demonstrate the effectiveness of the combined implementation of proposed angular velocity observer and full-state feedback attitude tracking controller.     

Arabic sign language intelligent translator

ABSTRACT

Arabic sign language (ArSL) is method of communication between deaf communities in Arab countries; therefore, the development of systemsthat can recognize the gestures provides a means for the Deaf to easily integrate into society. In this research we implemented a computational structurefor an intelligent interpreter that automatically recognizes the isolated dynamic gestures. The proposed system recognizes and translates gesturesperformed with one or both hands. It comprises five subsystems, building dataset, video processing, feature extraction, mapping between ArSL and Arabictext, and text generation. To apply the system, 100-signs of ArSL was used, which was applied on 1500 video files. It's were divided into five classes:alphabet, numbers, "prepositions, pronouns and question words", Arabic life expressions, and "nouns and verbs". The evaluation indicated that thesystem automatically recognizes and translates isolated dynamic ArSL gestures by highly accurate manner. The results showed that the system accuracy is 95.8%.     

Dynamic Passivation in Perovskite Quantum Dots for Specific Ammonia Detection at Room Temperature

Perovskite structured CsPbX₃ (X = Cl, Br, or I) quantum dots (QDs) have attracted considerable interest in the past few years due to their excellent optoelectronic properties. Surface passivation is one of the main pathways to optimize the optoelectrical performance of perovskite QDs, in which the amino group plays an important role for the corresponding interaction between lead and halide. In this work, it is found that ammonia gas could dramatically increase photoluminescence of purified QDs and effectively passivate surface defects of perovskite QDs introduced during purification, which is a reversible process. This phenomenon makes perovskite QDs a kind of ideal candidate for detection of ammonia gas at room temperature. This QD film sensor displays specific recognition behavior toward ammonia gas due to its significant fluorescence enhancement, while depressed luminescence in case of other gases. The sensor, in turn‐on mode, shows a wide detection range from 25 to 350 ppm with a limit of detection as low as 8.85 ppm. Meanwhile, a fast response time of ≈10 s is achieved, and the recovery time is ≈30 s. The fully reversible, high sensitivity and selectivity characteristics make CsPbBr₃ QDs ideal active materials for room‐temperature ammonia sensing.     

Visualizations of Mercury Methylation and Dynamic Transformations by In Vivo Imaging

Visualization of Hg(II) and MeHg in their native contexts is significant for examining mercury poisoning, while it is challenging because of indistinguishable fluorescent (FL) signals during FL imaging. Herein, visualizations of mercury methylation and dynamic transformations of Hg(II) and MeHg are achieved in living biological systems. Well distinguishable FL responses (blue emission for Hg(II), yellow emission for MeHg) are obtained by a double‐response FL probe (DPAHB) without any interference. As demonstrated by experimental and computational studies, the distinguishable signals are attributed to selective binding with DPAHB and different inhibition of excited‐state proton transfer. Through control tests for live‐dead markers, mercury methylation is demonstrated to be employed in living biological systems. Therefore, the methylation and dynamic transformations of both ions are monitored in zebrafish by imaging, and these results are confirmed by traditional high‐performance liquid chromatography‐based methods. The methylation of Hg(II) to MeHg, dynamic transformations and final accumulations of both species in zebrafish tissues are visualized successfully. This method is also convenient for fast evaluation of detoxification reagents. This is the first visualization of in vivo mercury methylation and dynamic transformation of both species and is effective for studying pathological processes in their native contexts.     

装填设备载荷影响因素分析及动力学仿真

大型货物的装填过程中影响载荷的因素较多,其中对中精度对装填载荷影响较为明显。通过动力学仿真软件ADAMS对装填过程中载荷进行模拟,并对各影响因素进行定量分析,得到对中偏差与装填载荷的关系。将仿真结果与试验数据进行对比,验证该仿真方法的正确性,可作为后续研究装填载荷的一种方法,为结构设计提供指导。     

基于BIM技术和有限元的检测与分析在PC结构中的应用研究

本文建立了PC结构施工全过程的BIM模型及有限元分析模型,对施工过程进行数值模拟与动态、静态监测,对装配式结构进行了结构性能评价,为结构可视化施工监测提供了技术支持。